Aangemaakte reacties
-
AuteurBerichten
-
liviu2004
DeelnemerI have seen that before on english forums, but no final solution. My opinion is that navi module is damaged and needs replacing.
liviu2004
DeelnemerYou can take a cd30 mp3 or cd30 but, must be also a facelift screen (GID). Also new wiring is needed, plugs are not the same pre-facelift to facelift, neither display neither radio.
I have done this conversion pre-facelift to facelift, now I have a Corsa C 2002 Z14XE full canbus.
Where do you live? If close to Capelle, come along my place and look how my setup is.
Very important: cd30mp3 and screen must be decoded or paired with the same code, or at least you know the security codes of each. I think will be more expensive than buying an NCDR 2015, cause for facelift you need also bigger plastic dome.
liviu2004
DeelnemerI can provide you with facelift GID and cd30 mp3 and you get BC on a bigger screen. Navigation possible if you want cd70.
liviu2004
DeelnemerI suspect the ECU to be the problem. If you wish, we can try one of my spare ecu. I see you live close to me, if you want, I can pass by in one evening.
liviu2004
Deelnemer
liviu2004
Deelnemerliviu2004
DeelnemerIf you want, we can put my tech2 on the car, I live very close to you, and see what is where and how. Then you can decide what to do, decode immo or buy complete set. But, what you have in the keys remains forever, unless you put new chips in. ZakhooiTM has a bag full with them. :D
liviu2004
Deelnemer1 – Ja, optie Ignition Logic met radio SETTINGS
liviu2004
DeelnemerAs the last instance, eeprom memory from immobiliser can be read and extract the code of it.
liviu2004
DeelnemerWhat engine is it? We can give it a try with my software to get the code, but I do not promise anything. Where do you live? The keys chips, once they are programmed, stay with the same code forever, so you should have the ecu and immo and keys with same code.
liviu2004
DeelnemerDoes the cd70 starts up? Can you go into the eeprom menu and give reset? Or it is stuck in update loop? More details are needed, pictures even better.
liviu2004
DeelnemerIf you have Z16XE, or Z16SE we can play with one of my ECU. But why don’t you read the error codes from ABS and post it here? And what engine do you have?
liviu2004
DeelnemerCID cannot be updated so simply by tech2, heard that some russians can do it.
However, it can be updated with original factory files, but MCU must be removed from the PCB and reprogrammed with correct files (more than 1).
Update will bring latest software version, 3 lines board computer and OPC / VXR start logo.This is how it looks like on my Corsa C:
[youtube:2z1hyi7c]http://www.youtube.com/watch?v=Ub3sR02alg4&list=UUyeKDDNKK5p-z-EgM8wbhLg[/youtube:2z1hyi7c]
5 december 2014 om 19:09 In reactie op: Had enough of fake opcom? Lets repair it, from v6 to v5 #18262989liviu2004
DeelnemerApparently these fake MCUs need those extra 2 pieces. This revised opcom has been fully tested on my Corsa C, I have tested all systems on the car, including mid speed canbus, including security code reading from clocks, all OK.
5 december 2014 om 18:07 In reactie op: Had enough of fake opcom? Lets repair it, from v6 to v5 #18262987liviu2004
Deelnemer1 december 2014 om 09:46 In reactie op: Astra H 2007, melding kvs-controle blijft maar komen #18262751liviu2004
DeelnemerMaybe it works for you:
[youtube:x8za4vz8]http://www.youtube.com/watch?v=-5814yr2p_Y[/youtube:x8za4vz8]
liviu2004
DeelnemerOk, you need a demonstration then. Good, youtube, here I come, give me some time to make the video.
LE: god damn it, managed to program it with opcom, using version vauxcom 131223d. :D
With opcom 08-2010 NO NO NO.
However, this was a GID corsa c, meriva a, so not sure about above astra.
liviu2004
DeelnemerIf the BID has been reset using tech2, than it wipes a bit more from the BID then the opcom can program.
liviu2004
DeelnemerI bet on that. :D Happened to me, no temperature display unless display is programmed.
liviu2004
DeelnemerSo if you are non-car-technician, try to find somebody here to help. Best is to keep it in dutch. First thing I would look to the bougie.
liviu2004
DeelnemerDutch is not my best. Let me try:
– bobine defect
– bougie defect
– cilinder compressie
– kapotte klep
– kapotte injector
– eculiviu2004
DeelnemerP0304 Cylinder 4 Misfire Detected
liviu2004
DeelnemerLook to this pictures, not related to elec windows but bcm / fusebox.
http://www.corsa-c.ro/index.php?/topic/8-upgrade-de-la-cdr2005-la-cd70-navi/?p=42″ onclick=”window.open(this.href);return false;
http://www.corsa-c.ro/index.php?/topic/8-upgrade-de-la-cdr2005-la-cd70-navi/?p=50″ onclick=”window.open(this.href);return false;
http://www.corsa-c.ro/index.php?/topic/24-montaj-esp/?p=118″ onclick=”window.open(this.href);return false;liviu2004
DeelnemerCheaper here without transport, same code but different color ? ? ? wtf.
http://www.ebay.co.uk/itm/vectra-C-02-05-centre-heater-Vent-surround-no-broken-slats-any-CC-GM-9177133-/161468866778?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item25984b60da” onclick=”window.open(this.href);return false;
liviu2004
DeelnemerIs it something like that?
http://www.ebay.de/itm/Luftdusen-Gehause-Verkleidung-MID-Bordcomputer-Navi-Display-Vectra-C-Signum-Opel-/251715907105?pt=DE_Autoteile&hash=item3a9b6fee21″ onclick=”window.open(this.href);return false;
http://www.ebay.de/itm/LUFTUNGSDUSE-LUFTUNGSSCHACHT-MITTE-FUR-CID-OPEL-VECTRA-C-SIGNUM-09177133-SILBER-/111460199795?pt=DE_Autoteile&hash=item19f38bad73″ onclick=”window.open(this.href);return false;
http://www.ebay.de/itm/LUFTUNGSDUSE-LUFTUNGSSCHACHT-MITTE-FUR-CID-OPEL-VECTRA-C-SIGNUM-09177133-SCHWARZ-/151206557322?pt=DE_Autoteile&hash=item23349cf68a” onclick=”window.open(this.href);return false;
You need a part number, also to match the color!
-
AuteurBerichten





